ENGINE UNIT > DISASSEMBLY


  1. REMOVE OIL FILLER CAP SUB-ASSEMBLY

  2. REMOVE RADIATOR CAP SUB-ASSEMBLY

  3. REMOVE NO. 1 ENGINE HANGER

  4. REMOVE NO. 2 ENGINE HANGER

  5. REMOVE SPARK PLUG

  6. REMOVE OIL PAN DRAIN PLUG

  7. REMOVE VENTILATION VALVE SUB-ASSEMBLY

  8. REMOVE CAMSHAFT POSITION SENSOR

  9. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  10. REMOVE CRANKSHAFT POSITION SENSOR

  11. REMOVE NO. 1 OIL PIPE

  12. REMOVE NO. 2 OIL PIPE

  13. REMOVE CYLINDER BLOCK WATER DRAIN COCK SUB-ASSEMBLY

  14. REMOVE OIL FILTER ELEMENT

  15. REMOVE CRANKSHAFT PULLEY

  16. REMOVE WATER INLET ASSEMBLY

  17. REMOVE WATER INLET WITH THERMOSTAT

  18. REMOVE WATER BY-PASS JOINT RR

  19. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY (for Bank 1)

  20. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY (for Bank 2)

  21. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

  22. REMOVE OIL PAN SUB-ASSEMBLY

  23. REMOVE OIL STRAINER SUB-ASSEMBLY

  24. REMOVE OIL PAN BAFFLE PLATE

  25. REMOVE REAR ENGINE OIL SEAL RETAINER

  26. REMOVE WATER PUMP ASSEMBLY

  27. REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY

  28. SET NO. 1 CYLINDER TO TDC / COMPRESSION

  29. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY

  30. REMOVE CHAIN TENSIONER SLIPPER

  31. REMOVE CHAIN SUB-ASSEMBLY

  32. REMOVE IDLE SPROCKET ASSEMBLY

  33. REMOVE NO. 1 CHAIN VIBRATION DAMPER

  34. REMOVE NO. 2 CHAIN VIBRATION DAMPER

  35. REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET

  36. REMOVE NO. 2 CAMSHAFT TIMING GEARS AND CHAIN (for Bank 1)

  37. REMOVE NO. 2 CHAIN TENSIONER ASSEMBLY

  38. REMOVE CAMSHAFT BEARING CAP

  39. REMOVE CAMSHAFT

  40. REMOVE NO. 2 CAMSHAFT

  41. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH

  42. REMOVE NO. 2 CAMSHAFT TIMING GEARS AND CHAIN (for Bank 2)

  43. REMOVE NO. 3 CHAIN TENSIONER ASSEMBLY

  44. REMOVE CAMSHAFT BEARING CAP

  45. REMOVE NO. 4 CAMSHAFT SUB-ASSEMBLY

  46. REMOVE NO. 3 CAMSHAFT SUB-ASSEMBLY

  47. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH

  48. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

  49. REMOVE VALVE LASH ADJUSTER ASSEMBLY

  50. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH

  51. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH

  52. REMOVE CYLINDER BLOCK WATER JACKET SPACER LH

  53. REMOVE CYLINDER BLOCK WATER JACKET SPACER RH

  54. REMOVE WATER OUTLET PIPE SUB-ASSEMBLY

  55. REMOVE VALVE STEM CAP

  56. REMOVE INTAKE VALVE

  57. REMOVE EXHAUST VALVE

  58. REMOVE VALVE STEM OIL SEAL

  59. REMOVE VALVE SPRING SEAT

  60. REMOVE NO. 1 STRAIGHT SCREW PLUG

  61. REMOVE NO. 2 STRAIGHT SCREW PLUG

  62. REMOVE UNION

  63. REMOVE RING PIN

  64. REMOVE STUD BOLT

  65. REMOVE PISTON SUB-ASSEMBLY WITH CONNECTING ROD

  66. REMOVE CONNECTING ROD BEARING

  67. REMOVE CRANKSHAFT

  68. REMOVE CRANKSHAFT BEARING

  69. REMOVE CRANKSHAFT THRUST WASHER SET

  70. REMOVE PISTON RING SET

  71. REMOVE PISTON SUB-ASSEMBLY WITH PIN

  72. REMOVE NO. 1 OIL NOZZLE SUB-ASSEMBLY