FRONT WIPER MOTOR > INSTALLATION

1. INSTALL FRONT WIPER MOTOR ASSEMBLY

2. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY

3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

4. INSTALL FRONT FENDER TO COWL SIDE SEAL LH

5. INSTALL FRONT FENDER TO COWL SIDE SEAL RH

6. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

8. INSTALL ENGINE ROOM SIDE COVER LH (for LHD)

9. INSTALL ENGINE ROOM SIDE COVER RH (for RHD)

10. INSTALL FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH

11. INSTALL FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH

12. INSTALL COOL AIR INTAKE DUCT SEAL

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. PERFORM INITIALIZATION