FRONT WIPER MOTOR > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE ENGINE ROOM SIDE COVER LH (for LHD)

4. REMOVE ENGINE ROOM SIDE COVER RH (for RHD)

5. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH

6. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

9. REMOVE FRONT FENDER TO COWL SIDE SEAL LH

10. REMOVE FRONT FENDER TO COWL SIDE SEAL RH

11. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

12. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY

13. REMOVE FRONT WIPER MOTOR ASSEMBLY