NETWORK GATEWAY ECU > INSTALLATION

1. INSTALL NETWORK GATEWAY ECU

2. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

5. INSTALL INSTRUMENT SIDE PANEL RH

6. INSTALL FRONT DOOR OPENING TRIM COVER RH

7. INSTALL FRONT DOOR SCUFF PLATE RH

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

9. INSTALL CONSOLE UPPER PANEL ASSEMBLY

10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. PERFORM INITIALIZATION

13. CHECK SRS WARNING LIGHT