NETWORK GATEWAY ECU > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

3. REMOVE CONSOLE UPPER PANEL ASSEMBLY

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

5. REMOVE FRONT DOOR SCUFF PLATE RH

6. REMOVE FRONT DOOR OPENING TRIM COVER RH

7. REMOVE INSTRUMENT SIDE PANEL RH

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

10. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

11. REMOVE NETWORK GATEWAY ECU