WIPER SWITCH > INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

2. INSTALL SPIRAL CABLE WITH STEERING SENSOR

3. INSTALL STEERING COLUMN COVER

4. ADJUST SPIRAL CABLE WITH STEERING SENSOR

5. INSTALL STEERING WHEEL ASSEMBLY

6. INSPECT STEERING WHEEL CENTER POINT

7. INSTALL STEERING PAD

8. INSTALL NO. 3 STEERING WHEEL COVER LOWER

9. INSTALL NO. 2 STEERING WHEEL COVER LOWER

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. INSPECT STEERING PAD

12. PERFORM INITIALIZATION

13. INSPECT SRS WARNING LIGHT