3GR-FE COMPRESSOR AND PULLEY > INSTALLATION

1. ADJUST COMPRESSOR OIL

2. INSTALL COMPRESSOR ASSEMBLY

3. INSTALL DISCHARGE HOSE SUB-ASSEMBLY

4. INSTALL NO. 1 COOLER REFRIGERANT SUCTION HOSE

5. INSTALL ENGINE UNDER COVER

6. INSTALL V-RIBBED BELT

7. INSTALL V-BANK COVER SUB-ASSEMBLY

8. INSTALL NO. 1 AIR CLEANER INLET

9. INSTALL ENGINE ROOM SIDE COVER LH

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. CHARGE REFRIGERANT

12. INSTALL COOL AIR INTAKE DUCT SEAL

13. WARM UP ENGINE

14. CHECK FOR LEAKAGE OF REFRIGERANT

15. PERFORM INITIALIZATION