3GR-FSE COMPRESSOR AND PULLEY > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE ENGINE ROOM SIDE COVER LH

4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

5. REMOVE NO. 1 AIR CLEANER INLET

6. REMOVE V-BANK COVER SUB-ASSEMBLY

7. REMOVE V-RIBBED BELT

8. REMOVE ENGINE UNDER COVER

9. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE

10. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

11. REMOVE COMPRESSOR ASSEMBLY