DTC    P2195    Oxygen (A/F) Sensor Signal Stuck Lean (Bank 1 Sensor 1)

DESCRIPTION

MONITOR DESCRIPTION

WIRING DIAGRAM

CONFIRMATION DRIVING PATTERN

INSPECTION PROCEDURE

CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO P2195, P2196, 2197 OR P2198)

READ VALUE USING INTELLIGENT TESTER (OUTPUT VOLTAGE OF A/F SENSOR)

PERFORM CONFIRMATION DRIVING PATTERN

CHECK WHETHER DTC OUTPUT RECURS (DTC P2195, P2196, P2197 OR P2198)

REPLACE AIR FUEL RATIO SENSOR

PERFORM CONFIRMATION DRIVING PATTERN

CHECK WHETHER DTC OUTPUT RECURS (DTC P2195, P2196, P2197 OR P2198)

CONFIRM WHETHER VEHICLE HAS RUN OUT OF FUEL IN PAST

INSPECT AIR FUEL RATIO SENSOR (HEATER RESISTANCE)

INSPECT A/F HTR RELAY

CHECK HARNESS AND CONNECTOR (A/F SENSOR - ECM)

CHECK AIR INDUCTION SYSTEM

CHECK FUEL PRESSURE

INSPECT FUEL INJECTOR ASSEMBLY

REPLACE AIR FUEL RATIO SENSOR

PERFORM CONFIRMATION DRIVING PATTERN

CHECK WHETHER DTC OUTPUT RECURS (DTC P2195, P2196, P2197 OR P2198)

CONFIRM WHETHER VEHICLE HAS RUN OUT OF FUEL IN PAST