DYNAMIC RADAR CRUISE CONTROL SYSTEM > ADJUSTMENT

1. REMOVE COOL AIR INTAKE DUCT SEAL

2. REMOVE ENGINE UNDER COVER

3. REMOVE FRONT FENDER LINER LH

4. REMOVE FRONT FENDER LINER RH

5. REMOVE FRONT BUMPER COVER

6. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY

7. INSTALL FRONT BUMPER COVER

8. INSTALL FRONT FENDER LINER LH

9. INSTALL FRONT FENDER LINER RH

10. INSTALL ENGINE UNDER COVER

11. INSTALL COOL AIR INTAKE DUCT SEAL