FRONT SUSPENSION UPPER ARM > INSTALLATION

1. TEMPORARILY TIGHTEN FRONT SUSPENSION UPPER ARM

2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

3. INSTALL ABSORBER CONTROL ACTUATOR (for AVS)

4. INSTALL FRONT SHOCK ABSORBER CAP UPPER (for AVS)

5. CONNECT FRONT SUSPENSION UPPER ARM

6. CONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY FRONT

7. CONNECT SPEED SENSOR FRONT

8. STABILIZE SUSPENSION

9. FULLY TIGHTEN FRONT SUSPENSION UPPER ARM

10. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

11. INSTALL ENGINE ROOM SIDE COVER

12. INSTALL FRONT WHEEL

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. HEADLIGHT AIMING INSPECTION

15. HEADLIGHT AIMING ADJUSTMENT

16. INSPECT VEHICLE STABILITY CONTROL SYSTEM

17. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM

18. PERFORM INITIALIZATION

19. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT