FRONT SHOCK ABSORBER > INSTALLATION

1. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

2. INSTALL ABSORBER CONTROL ACTUATOR (for AVS)

3. INSTALL SHOCK ABSORBER CAP UPPER (for AVS)

4. CONNECT FRONT SUSPENSION UPPER ARM

5. CONNECT SPEED SENSOR FRONT

6. CONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY FRONT

7. STABILIZE SUSPENSION

8. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

9. INSTALL ENGINE ROOM SIDE COVER

10. INSTALL FRONT WHEEL

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. HEADLIGHT AIMING INSPECTION

13. HEADLIGHT AIMING ADJUSTMENT

14. INSPECT VEHICLE STABILITY CONTROL SYSTEM

15. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM

16. PERFORM INITIALIZATION

17. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT