ELECTRONICALLY CONTROLLED BRAKE SYSTEM > TEST MODE PROCEDURE

1. WARNING LIGHT AND INDICATOR LIGHT BULB CHECK

2. SENSOR SIGNAL CHECK BY TEST MODE (SIGNAL CHECK) (WHEN USING INTELLIGENT TESTER:)

3. ACCELERATION SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

4. MASTER CYLINDER PRESSURE SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

5. SPEED SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

6. YAW RATE SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

7. END OF SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

8. READ DTC OF SIGNAL CHECK FUNCTION (WHEN USING INTELLIGENT TESTER:)

9. DTC OF TEST MODE FUNCTION (SIGNAL CHECK) (WHEN USING INTELLIGENT TESTER:)

10. SENSOR SIGNAL CHECK BY TEST MODE (SIGNAL CHECK) (WHEN USING SST CHECK WIRE:)

11. ACCELERATION SENSOR CHECK (WHEN USING SST CHECK WIRE:)

12. MASTER CYLINDER PRESSURE SENSOR CHECK (WHEN USING SST CHECK WIRE:)

13. SPEED SENSOR CHECK (WHEN USING SST CHECK WIRE:)

14. YAW RATE SENSOR CHECK (WHEN USING SST CHECK WIRE:)

15. END OF SENSOR CHECK (WHEN USING SST CHECK WIRE:)

16. READ DTC OF SIGNAL CHECK FUNCTION (WHEN USING SST CHECK WIRE:)

17. DTC OF TEST MODE FUNCTION (SIGNAL CHECK) (WHEN USING SST CHECK WIRE:)