VEHICLE STABILITY CONTROL SYSTEM > TEST MODE PROCEDURE

1. WARNING LIGHT AND INDICATOR LIGHT CHECK

2. SENSOR SIGNAL CHECK BY TEST MODE (SIGNAL CHECK) (WHEN USING INTELLIGENT TESTER:)

3. LOST BOOSTER PRESSURE JUDGMENT CHECK AND MASTER CYLINDER PRESSURE SENSOR ZERO POINT CALIBRATION (WHEN USING INTELLIGENT TESTER:)

4. ACCELERATION SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

5. MASTER CYLINDER PRESSURE SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

6. SPEED SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

7. YAW RATE SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

8. END OF SENSOR CHECK (WHEN USING INTELLIGENT TESTER:)

9. READ DTC OF SIGNAL CHECK FUNCTION (WHEN USING INTELLIGENT TESTER:)

10. SENSOR SIGNAL CHECK BY TEST MODE (SIGNAL CHECK) (WHEN USING SST CHECK WIRE:)

11. LOST BOOSTER PRESSURE JUDGMENT CHECK AND MASTER CYLINDER PRESSURE SENSOR ZERO POINT CALIBRATION (WHEN USING SST CHECK WIRE:)

12. ACCELERATION SENSOR CHECK (WHEN USING SST CHECK WIRE:)

13. MASTER CYLINDER PRESSURE SENSOR CHECK (WHEN USING SST CHECK WIRE:)

14. SPEED SENSOR CHECK (WHEN USING SST CHECK WIRE:)

15. YAW RATE SENSOR CHECK (WHEN USING SST CHECK WIRE:)

16. END OF SENSOR CHECK (WHEN USING SST CHECK WIRE:)

17. READ DTC OF SIGNAL CHECK FUNCTION (WHEN USING SST CHECK WIRE:)

18. DTC OF TEST MODE (SIGNAL CHECK) FUNCTION