ROOM TEMPERATURE SENSOR > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

3. REMOVE CONSOLE UPPER PANEL ASSEMBLY

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

5. REMOVE FRONT DOOR SCUFF PLATE LH

6. REMOVE FRONT DOOR OPENING TRIM COVER LH

7. REMOVE INSTRUMENT SIDE PANEL LH

8. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

11. REMOVE ROOM TEMPERATURE SENSOR