REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR LIGHT ASSEMBLY


B109917

  1. Install the gasket to the light.

  1. Install the light bulb to the light socket and wire.

  1. Install the light bulb socket and wire to the light.

  1. Install the light with the 3 nuts.

  1. Connect the connector.



2. INSTALL REAR COMBINATION LIGHT ASSEMBLY


B110743

  1. Install the gasket to the combination light.

  1. Install the combination light bulb to the combination light socket and wire.

  1. Install the combination light bulb socket and wire to the combination light.



    B109921

  1. Install the combination light with the 3 nuts.



3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT


4. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH


5. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH


6. INSTALL REAR FLOOR FINISH PLATE


7. INSTALL TOOL BOX


8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


9. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.