FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE RADIATOR GRILLE PROTECTOR


B109995E01

  1. Using a clip remover, detach the 15 clips and remove the protector.



2. REMOVE RADIATOR GRILLE MOULDING


B108965E01

  1. Using a clip remover, remove the 2 clips.

  1. Detach the 6 claws and remove the screw and moulding.



3. REMOVE RADIATOR GRILLE


B108964E01

  1. Using a clip remover, remove the 2 clips.

  1. Detach the 5 claws and remove the radiator grille.



4. REMOVE ENGINE ROOM NO. 4 WIRE (w/ Clearance Sonar System)


    B106151E01

  1. Disconnect the 4 connectors and 15 clamps and remove the wire.



5. REMOVE FRONT BUMPER COVER LOWER


    B106152E01

  1. Detach the 2 claws and remove the bumper cover lower.



6. REMOVE RADIATOR GRILLE LOWER

  1. Detach the 9 claws and remove the grille lower.



7. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET

  1. Remove the 2 screws and mounting bracket.



8. REMOVE FOG LIGHT ASSEMBLY


B109932E01

  1. Remove the bolt.

  1. Detach the 2 claws and remove the fog light.



9. REMOVE NO. 3 ULTRASONIC SENSOR (w/ Clearance Sonar System)

  1. Disconnect the sensor connector.



    B111080

  1. Remove the sensor from the sensor retainer as shown in the illustration.



    B109680E02

  1. Remove the sensor retainer as shown in the illustration.