FRONT BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 3 ULTRASONIC SENSOR (w/ Clearance Sonar System)


    B109679

  1. Install the sensor retainer to the front bumper.



    B109681

  1. Install the sensor as shown in the illustration.

  1. Connect the sensor connector.



2. INSTALL FOG LIGHT ASSEMBLY


B109932E02

  1. Attach the 2 claws to install the fog light.

  1. Install the bolt.



3. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET

  1. Install the 2 screws and mounting bracket.



4. INSTALL RADIATOR GRILLE LOWER

  1. Attach the 9 claws to install the grille lower.



5. INSTALL FRONT BUMPER COVER LOWER


B106152E03

  1. Attach the 2 claws to install the bumper cover lower.



6. INSTALL ENGINE ROOM NO. 4 WIRE (w/ Clearance Sonar System)


    B106151E03

  1. Attach the 15 clamps to install the wire.

  1. Connect the 4 connectors.



7. INSTALL RADIATOR GRILLE


B108964E02

  1. Attach the 5 claws to install the radiator grille.

  1. Install the 2 clips.



8. INSTALL RADIATOR GRILLE MOULDING


B108965E04

  1. Attach the 6 claws and install the 2 clips to install the moulding.

  1. Install the moulding with the screw.



9. INSTALL RADIATOR GRILLE PROTECTOR


B109995E03

  1. Attach the 15 clips to install the protector.