REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE LUGGAGE ROOM NO. 3 WIRE (w/ Clearance Sonar System)


B106158E01

  1. Detach the 4 clamps and remove the wire.



2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System)


E075063E01

  1. Disconnect the sensor connector.

  1. Remove the sensor retainer.

  1. Remove the sensor from the rear bumper.



3. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Clearance Sonar System)


B110244

  1. Disconnect the sensor connector.

  1. Remove the sensor retainer.

  1. Remove the sensor from the rear bumper.