REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System)


B110248

  1. Install the sensor to the rear bumper.

  1. Install the sensor retainer as shown in the illustration.

  1. Connect the sensor connector.



2. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Clearance Sonar System)


B109678

  1. Install the sensor to the rear bumper.

  1. Install the sensor retainer as shown in the illustration.

  1. Connect the sensor connector.



3. INSTALL LUGGAGE ROOM NO. 3 WIRE (w/ Clearance Sonar System)


B106158E03

  1. Attach the 4 clamps to install the wire.