ROCKER PANEL MOULDING > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL ROCKER PANEL MOULDING


    B108963E02

  1. Attach the 9 clips to install the moulding.



    B107511

  1. Install the 2 screws.



    B100646

  1. Install the 8 clips.



    B100643

  1. Install the screw on the rear side.



    B100642

  1. Install the screw on the front side.



2. INSTALL FRONT DOOR WEATHERSTRIP


B107510E02

  1. Attach the 14 clips to install the weatherstrip.



3. INSTALL REAR FLOOR HOUSING SHIELD


B106810

  1. Install the shield with the clip and screw.



4. INSTALL QUARTER PANEL WHEEL OPENING MOULDING


    B107504

  1. Install the moulding with the 4 screws.



5. INSTALL FRONT FENDER WHEEL OPENING MOULDING


    B107503

  1. Install the moulding with the 5 screws.