ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE FRONT FENDER WHEEL OPENING MOULDING


B107503

  1. Remove the 5 screws and moulding.



2. REMOVE QUARTER PANEL WHEEL OPENING MOULDING


B107504

  1. Remove the 4 screws and moulding.



3. REMOVE REAR FLOOR HOUSING SHIELD


B106810

  1. Using a clip remover, remove the clip.

  1. Remove the screw and shield.



4. REMOVE FRONT DOOR WEATHERSTRIP


    B107510E01

  1. Detach the 14 clips and remove the weatherstrip.



5. REMOVE ROCKER PANEL MOULDING


    B100642

  1. Remove the screw on the front side.



    B100643

  1. Remove the screw on the rear side.



    B106811

  1. Remove the 8 clips.



    B107511

  1. Remove the 2 screws.



    B108963E01

  1. Detach the 9 clips and remove the moulding.