LUGGAGE COMPARTMENT DOOR GARNISH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    B110492E01

  1. Open the cover, detach the 4 claws and remove the assist grip cover.



    B110496

  1. Remove the 2 screws and assist grip.



3. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B110497

  1. Using a clip remover, remove the 11 clips and door cover.



4. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


B107483E04

  1. Disconnect the television camera connector.

  1. Detach the television camera connector clamp.

  1. Remove the 2 nuts and television camera.



5. REMOVE REAR COMBINATION LIGHT ASSEMBLY


B109921

  1. Disconnect the connector.

  1. Remove the 3 nuts and combination light.

  1. Remove the combination light bulb from the combination light socket and wire sub-assembly.



    B110743

  1. Remove the gasket.

    NOTICE:
    1. Be sure to remove the gasket completely from the body.
    2. Be sure to replace it with the supplied combination light gasket to prevent water intrusion.



6. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE


    B109987

  1. Remove the 3 nuts.



    B111353E05

  1. Detach the 7 clips and remove the garnish.