AUDIO AND VISUAL SYSTEM > Pressing Power Switch does not Turn on System

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK VEHICLE CONDITION

  1. Check that conditions in the cabin are not likely to cause condensation.

    HINT:
    This problem occurs when the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.

    OK:
    Condensation is not likely.



NG
DRY VEHICLE CONDITION
OK


2.CHECK RADIO RECEIVER ASSEMBLY

  1. Check that the malfunction disappears when the radio receiver assembly is replaced with a normal one.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE