PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    C108491E01

  1. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Shift Position
    		Tester Connection
    		Specified Condition
    P
    		2 - 6 and 4 - 5
    		Below 1 Ω
    Except P
    		↑
    		10 kΩ higher
    R
    		1 - 2
    		Below 1 Ω
    Except R
    		↑
    		10 kΩ higher
    N
    		2 - 9 and 4 - 5
    		Below 1 Ω
    Except N
    		↑
    		10 kΩ higher
    D, S, "+" and "-"
    		2 - 7
    		Below 1 Ω
    Except D, S, "+" and "-"
    		↑
    		10 kΩ higher