SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR)


  1. Install the transmission revolution sensor (SP2 sensor).

    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.



      2. C112936E02

    2. Install the transmission revolution sensor with the bolt.

      Torque:
      5.4 N*m{ 55 kgf*cm , 48 ft.*lbf }

    3. Connect the transmission revolution sensor connector.



2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT SENSOR)


  1. Install the transmission revolution sensor (NT sensor).

    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.



      2. G021320E02

    2. Install the transmission revolution sensor with the bolt.

      Torque:
      5.4 N*m{ 44 kgf*cm , 48 ft.*lbf }

    3. Connect the transmission revolution sensor connector.