FRONT AXLE HUB > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. DISCONNECT SPEED SENSOR FRONT


    F048237

  1. Disconnect the speed sensor connector from the speed sensor front.

    NOTICE:
    1. Be careful not to damage the speed sensor.
    2. Prevent foreign matter from adhering to the speed sensor.



3. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY


    C113083

  1. Remove the 2 bolts, and disconnect the brake caliper assembly.

    NOTICE:
    Use a wire or an equivalent to keep the brake caliper from hanging down by the flexible hose.



4. REMOVE FRONT DISC


    F041543E03

  1. Put matchmarks on the front disc and the axle hub.

  1. Remove the front disc.



5. REMOVE FRONT AXLE HUB SUB-ASSEMBLY


    F048238

  1. Remove the 4 bolts, front axle hub sub-assembly and front disc brake dust cover.