PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    G027076E05

  1. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Shift Position
    		Tester Connection
    		Specified Condition
    P
    		1 - 3 and 6 - 9
    		Below 1 Ω
    Except P
    		↑
    		10 kΩ or higher
    R
    		2 - 3
    		Below 1 Ω
    Except R
    		↑
    		10 kΩ or higher
    N
    		3 - 5 and 6 - 9
    		Below 1 Ω
    Except N
    		↑
    		10 kΩ or higher
    D, S, "+" and "-"
    		3 - 7
    		Below 1 Ω
    Except D, S, "+" and "-"
    		↑
    		10 kΩ or higher