SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION REVOLUTION SENSOR


    C107689E02

  1. Install the transmission revolution sensor (SP2 sensor).

    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.

    2. Install the transmission revolution sensor with the bolt.

      Torque:
      5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

    3. Connect the transmission revolution sensor connector.



    C101490E01

  1. Install the transmission revolution sensor (NT sensor).

    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.

    2. Install the transmission revolution sensor with the bolt.

      Torque:
      5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

    3. Connect the transmission revolution sensor connector.