WIPER AND WASHER SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

    Cowl side junction block ECU LH 
    Display (Item)
    		Default
    		Contents
    		Setting
    AUTO WIPER (Auto wiper)
    		AVAIL
    		Function to operate wiper automatically when it is raining
    		NOT AVAIL / AVAIL
    REWPER CONTROL (Rewiper control)
    		SPD MOD
    		Function to change time between end of wiper motor operation and start of wiper operation to prevent streaking from washer fluid
    		OFF / 3 s / SPD MOD
    SPEED MODE (Speed mode)
    		AVAIL
    		Function to change to intermittent operation when vehicle comes to stop from driving condition with wiper switch in LO position
    		NOT AVAIL / AVAIL