LIGHTING SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC


    E109466E03

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the DTCs by following the prompts on the tester screen.

    HINT:
    Please refer to the intelligent tester operator's manual for further details.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Erase the DTCs by following the directions on the tester screen.

    HINT:
    Please refer to the intelligent tester operator's manual for further details.