NAVIGATION SYSTEM > MAP Disc cannot be Inserted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MAP DISC
I100152E12

  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on map disc.



NG
REPLACE MAP DISC
OK


2.CHECK NAVIGATION ECU

  1. Check that the "PUSH" indicator near the disc slot turns on.

    OK:
    Indicator turns on.



NG
PRESS EJECT SWITCH TO EJECT DISC
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE