NAVIGATION SYSTEM > Cursor or MAP Rotates when Vehicle Stopped

for Preparation Click here

INSPECTION PROCEDURE

1. Check with the customer if the vehicle has been rotated on a parking turntable.
   

   OK:

   Vehicle has not been turned on a turntable.
   

   HINT:

   If the vehicle is rotated on a turntable with the engine switch on (ACC) or on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate.

NG	TURN ENGINE SWITCH ON (ACC OR IG) AFTER VEHICLE IS COMPLETELY STOPPED

OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE