VENTILATION VALVE > INSTALLATION

for Preparation Click here



1. INSTALL VENTILATION VALVE SUB-ASSEMBLY


A092803E01

  1. Install the valve.

    1. Apply adhesive to 2 or 3 threads.

      Adhesive:
      THREE BOND 1324 or equivalent

    2. Install the valve.

      Torque:
      27 N*m{ 275 kgf*cm , 20 ft.*lbf }



    A107579

  1. Connect the hose to the valve.



2. INSTALL INTAKE AIR CONNECTOR PIPE


A107580

  1. Connect the air hose and ventilation hose.

  1. Install the bolt and intake air connector pipe with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Tighten the 2 hose clamps.



3. INSTALL ENGINE ROOM SIDE COVER RH


A109858E02

  1. Install the side cover with the 2 clips and nut.



4. INSTALL COOL AIR INTAKE DUCT SEAL


A109857E02

  1. Install the intake duct seal with the 7 clips.



5. INSTALL V-BANK COVER

  1. Install the cover with the 2 nuts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 ft.*lbf }