VENTILATION VALVE > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER

  1. Remove the 2 nuts and cover.



2. REMOVE COOL AIR INTAKE DUCT SEAL


A109857E02

  1. Remove the 7 clips and intake duct seal.



3. REMOVE ENGINE ROOM SIDE COVER RH


A109858E02

  1. Remove the nut, 2 clips and side cover.



4. REMOVE INTAKE AIR CONNECTOR PIPE


A107580

  1. Disconnect the air hose and ventilation hose.

  1. Loosen the 2 hose clamps.

  1. Remove the bolt and intake air connector.



5. REMOVE VENTILATION VALVE SUB-ASSEMBLY

  1. Disconnect the ventilation hose from the valve.



    A107575

  1. Remove the valve.