OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP ROTOR SET


    A110455

  1. Place the drive and driven rotors into the pump body with the marks facing the pump body cover side.



    A110454

  1. Install the pump body cover with the 10 screws.

    Torque:
    10 N*m{ 105 kgf*cm , 8 ft.*lbf }



2. INSTALL OIL PUMP RELIEF VALVE


    A110453

  1. Insert the relief valve and compression spring into the oil pump body hole.

  1. Install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }