HEATED OXYGEN SENSOR (for Sensor 1) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 2 ENGINE UNDER COVER


3. REMOVE ENGINE UNDER COVER


4. REMOVE HEATED OXYGEN SENSOR (for Bank 1)


    A100605

  1. Remove the 2 bolts and heat insulator.

  1. Disconnect the sensor connector.



    A100670E01

  1. Using SST, remove the sensor.

    SST
    09224-00010  



5. REMOVE HEATED OXYGEN SENSOR (for Bank 2)


    A101954

  1. Disconnect the sensor wire from the 2 wire clamps.

  1. Disconnect the sensor connector.



    A100611E01

  1. Using SST, remove the sensor.

    SST
    09224-00010