REAR SHOCK ABSORBER > INSPECTION

for Preparation Click here



1. INSPECT REAR SHOCK ABSORBER


    G032789

  1. Extend and compress the rear shock absorber.

    Standard:
    When extending and compressing the rear shock absorber at a constant speed, it can be moved without any abnormal resistance or noise and load is constant through the entire stroke. It also extends at a constant speed after being compressed.

    If there is any abnormality, replace the rear shock absorber with a new one.

    NOTICE:
    When disposing of the rear shock absorber, see DISPOSAL on page Click here.



    C107737E01

  1. Check that there is a difference in the damping force when the rod is positioned as shown. (for AVS)

    NOTICE:
    When disposing of the rear shock absorber, see DISPOSAL on page Click here.