INSTRUMENT PANEL SAFETY PAD > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


B105651

  1. Remove the screw and duct.



2. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


B105650

  1. Remove the screw and duct.



3. REMOVE DEFROSTER NOZZLE ASSEMBLY


B105654

  1. Remove the 3 screws and nozzle.



4. REMOVE NO. 3 HEATER TO REGISTER DUCT


B105653

  1. Remove the 3 screws and duct.



5. REMOVE NO. 1 HEATER TO REGISTER DUCT


B105652

  1. Remove the 3 screws and duct.



6. REMOVE NO. 2 HEATER TO REGISTER DUCT


B106638

  1. Remove the 4 screws and duct.



7. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


B106639E03

  1. Using a screwdriver, detach the 4 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Using a screwdriver, detach the 6 clips and remove the register.

    HINT:
    Tape the screwdriver tip before use.



8. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B111907E01

  1. Using a screwdriver, detach the 8 claws and remove the register.

    HINT:
    Tape the screwdriver tip before use.



9. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


B106641E04

  1. Using a screwdriver, detach the 6 claws and remove the register.

    HINT:
    Tape the screwdriver tip before use.



10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    C106882

  1. Disconnect the 2 connectors and remove the instrument panel wire assembly from the front passenger airbag assembly.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



    C106880

  1. Remove the 2 screws.



    C106881E01

  1. Disengage the 5 hooks (A).

  1. Disengage the 5 hooks (B) and remove the front passenger airbag assembly from the instrument panel.



11. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


B105662E02

  1. Using a screwdriver, detach the 2 clips and 2 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the speaker panel.



12. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


B105660E02

  1. Using a screwdriver, detach the 2 clips and 2 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the speaker panel.



13. REMOVE NO. 1 SPEAKER HOLE COVER


B105661E02

  1. Using a screwdriver, detach the 4 clips and remove the speaker panel.

    HINT:
    Tape the screwdriver tip before use.



14. REMOVE NO. 2 FRONT SPEAKER RH



E107380E01

  1. Remove the 2 bolts.

  1. Disconnect the connector and remove the speaker.

    HINT:
    Do not touch the cone part of the speaker.



15. REMOVE NO. 2 FRONT SPEAKER LH



E107380E01

  1. Remove the 2 bolts.

  1. Disconnect the connector and remove the speaker.

    HINT:
    Do not touch the cone part of the speaker.



16. REMOVE FRONT STEREO COMPONENT SPEAKER


    E107374

  1. Disconnect the connector.

  1. Remove the 3 screws and speaker.

    HINT:
    Do not touch the cone part of the speaker.



17. REMOVE ENGINE SWITCH
For 3GR-FE (Click here)
For 3GR-FSE (Click here)
For 3UZ-FE (Click here)


18. REMOVE REAR CONSOLE ARMREST ASSEMBLY


B111910

  1. Remove the 4 screws.

  1. Remove the rear console armrest, as shown in the illustration.



19. REMOVE CONSOLE BOX SUB-ASSEMBLY UPPER


B105666

  1. Remove the console box as shown in the illustration.



20. REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY


B105657E03

  1. Using a screwdriver, detach the clamp and 2 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the light.



21. REMOVE POWER OUTLET SOCKET ASSEMBLY


    E003722E05

  1. Rotate the socket to disengage the notch.



    B108949

  1. Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.

  1. Remove the socket from the cover.



22. REMOVE POWER POINT SOCKET COVER


B108019E03

  1. Using a screwdriver, detach the 2 claws and remove the socket cover.

    HINT:
    Tape the screwdriver tip before use.



23. REMOVE NO. 5 CONSOLE BOX MOUNTING BRACKET

  1. Remove the 2 screws and bracket.