DTC    01-E0    Registration Complete Indication Error (CAMERA)

DTC    01-E3    Registration Demand Transmission (CAMERA)

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
01-E0
"Registration Complete" command from master cannot be received
-
01-E3
When either condition below is met:
  1. "Registration Request" command is output from slave component
  2. "Registration Connection Check Instruction" or "Registration Request" command is output from sub-master component
-

HINT:
Even if no failure is detected, this code may be stored depending on the battery condition or engine start voltage.


INSPECTION PROCEDURE

This DTC is not related to the malfunction.