POWER STEERING ECU > REMOVAL

for Preparation Click here



1. REMOVE BATTERY

  1. Disconnect the negative (-) battery cable from the battery.

  1. Disconnect the positive (+) battery cable from the battery.

  1. Remove the 2 nuts and the battery clamp.

  1. European models only :

    1. Disconnect the battery thermometer connector.

  1. Remove the battery insulator.

  1. Remove the battery.



2. REMOVE POWER STEERING ECU ASSEMBLY

  1. Remove the battery tray support No.1.



    C105537E01

  1. Remove the 3 bolts and disconnect the ground cable terminal.



    C105538

  1. Release the locks of the 2 power steering ECU assembly connectors and disconnect the connectors.

  1. Remove the power steering ECU assembly.