OIL PUMP > REPLACEMENT

for Preparation Click here



1. REMOVE ENGINE FRONT OIL SEAL


A106081E01

  1. Using a screwdriver and wooden block, pry out the oil seal.

    HINT:
    Tape the screwdriver tip before use.



2. INSTALL ENGINE FRONT OIL SEAL


A106152E01

  1. Using SST, tap in a new oil seal until its surface is flush with the oil pump cover edge.

    SST
    09316-60011   (09316-00011)

    NOTICE:
    1. Keep the lip free from foreign matter.
    2. Do not tap the oil seal at an angle.