DTC    58-43    SPD Signal Error (NAVI)

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
58-43
Difference between GPS speed and SPD pulse is detected
  1. Speed signal error
  2. Speed signal circuit
  3. Navigation ECU

INSPECTION PROCEDURE

1.CHECK SPEED SIGNAL
Refer to the "speed signal error" (Click here).
If the speed signal is operating normally, proceed to the next step.

NEXT


2.CHECK VEHICLE SPEED SIGNAL CIRCUIT BETWEEN NAVIGATION ECU AND COMBINATION METER
Refer to the "vehicle speed signal circuit between navigation ECU and combination meter" (Click here).

NEXT

END