FUEL PUMP > DISASSEMBLY

for Preparation Click here



1. REMOVE FUEL SENDER GAUGE ASSEMBLY


A101950E01

  1. Disconnect the fuel sender gauge connector.

  1. Press down on the sender gauge claw labeled A. Then slide the sender gauge upward.



2. REMOVE SUB-TANK ASSEMBLY


A094971E02

  1. Using a screwdriver, detach the 4 claws from the claw holes and remove the sub-tank.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE FUEL PUMP ASSEMBLY

  1. Disconnect the fuel pump connector.



    A101951E02

  1. Detach the 2 claws from the claw holes and remove the fuel pump.



    A101966E01

  1. Remove the fuel pump filter seal from the fuel pump.

  1. Remove the fuel pump spacer from the fuel pump.



4. REMOVE FUEL RELIEF VALVE ASSEMBLY

  1. Disconnect the fuel pump connector from the fuel filter.



    A088396E02

  1. Using a screwdriver, detach the claw and remove the relief valve.



5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    A080536E01

  1. Remove the clip and fuel pressure regulator from the relief valve.



    A096585E01

  1. Remove the 2 O-rings from the fuel pressure regulator.