FUEL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    A096585E01

  1. Apply a light coat of gasoline to 2 new O-rings, and install it to the fuel pressure regulator.

  1. Install the fuel pressure regulator to the fuel relief valve.



    A101947E01

  1. Install the clip to the relief valve.



2. INSTALL FUEL RELIEF VALVE ASSEMBLY


A101961E01

  1. Apply a light coat of gasoline to a new O-ring, and install the fuel relief valve to the fuel filter.



3. INSTALL FUEL PUMP ASSEMBLY


    A101952E01

  1. Install the fuel pump spacer to the fuel pump.

  1. Apply a light coat of gasoline to a new seal, and install it to the fuel pump.

  1. Install the fuel pump to the fuel filter.

  1. Connect the fuel pump connector.



4. INSTALL FUEL SUB-TANK ASSEMBLY


A101960E01

  1. Apply a light coat of gasoline to a new O-ring, and install the O-ring and fuel sub-tank to the fuel filter.



5. INSTALL FUEL SENDER GAUGE ASSEMBLY


A101950E07

  1. Set the fuel sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

  1. Connect the fuel sender gauge connector.