POWER DOOR LOCK CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
A103811E24

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the DTC by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Erase the DTC by following the directions on the tester screen.

HINT:
Refer to the intelligent tester operator's manual for further details.