DRIVE BELT > REMOVAL

for Preparation Click here



1. REMOVE COOL AIR INTAKE DUCT SEAL


A105932E01

  1. Remove the 7 clips and intake duct seal.



2. REMOVE NO. 1 AIR CLEANER INLET

  1. Remove the bolt and air cleaner inlet.



3. REMOVE V-BANK COVER SUB-ASSEMBLY

  1. Remove the 2 nuts and V-bank cover.



4. REMOVE V-RIBBED BELT


    A109593

  1. While releasing the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.



    A109594

  1. While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner.