RADIATOR GRILLE > INSTALLATION

for Preparation Click here


Heating temperature:
Item
Temperature
Vehicle body
40 to 60°C (104 to 140°F)
Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body and emblem excessively.

HINT:
When installing the emblem, heat the vehicle body and emblem using a heat light.



1. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/o Dynamic Radar Cruise Control System)


B106154

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. If reusing the emblem:
    Clean the emblem.

    1. Using a heat light, heat the emblem.

    2. Remove the double-sided tape from the emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the emblem.

  1. Install the emblem.

    1. Using a heat light, heat the vehicle body and emblem.

    2. Remove the peeling paper from the face of the emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the emblem.



2. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Dynamic Radar Cruise Control)


    B111111E10

  1. Attach the 2 claws.



    B111110

  1. Install the 2 spring nuts and emblem.



3. INSTALL RADIATOR GRILLE


B108964E02

  1. Attach the 5 claws to install the radiator grille.

  1. Install the 2 clips.



4. INSTALL RADIATOR GRILLE MOULDING


B108965E04

  1. Attach the 6 claws and install the 2 clips to install the moulding.

  1. Install the moulding with the screw.



5. INSTALL RADIATOR GRILLE PROTECTOR


B109995E03

  1. Attach the 15 clips to install the protector.