PARKING BRAKE PEDAL (for LHD) > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING BRAKE NO.1 CABLE ASSEMBLY


    C106338E02

  1. Pass the parking brake No.1 cable assembly through the parking brake pedal and hold the cable with the clip.

  1. Pass the parking brake cable through the pedal guide. Temporarily tighten the wire adjusting No.1 nut and lock nut.

    HINT:
    Fully tighten the wire adjusting No.1 nut and lock nut when adjusting the parking brake pedal free play.

  1. Fully bend the parking brake pedal claw.



2. INSTALL PARKING BRAKE SWITCH


    C106339

  1. Install the parking brake switch with the screw.



3. INSTALL PARKING PEDAL PAD


    C110370E01

  1. Engage the claw and install the parking pedal pad on the parking brake pedal.