FRONT PASSENGER AIRBAG ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT BATTERY NEGATIVE TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.



2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(Click here)

HINT:
Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".



3. REMOVE SIDE DEFROSTER NOZZLE NO.1 DUCT


B105651

  1. Remove the screw and duct.



4. REMOVE HEATER TO REGISTER NO.1 DUCT


B105652

  1. Remove the 3 screws and duct.



5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    C106882

  1. Disconnect the 2 connectors and remove the instrument panel wire assembly from the front passenger airbag assembly.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



    C106880

  1. Remove the 2 screws.



    C106881E01

  1. Disengage the 5 hooks (A).

  1. Disengage the 5 hooks (B) and remove the front passenger airbag assembly from the instrument panel.